Digital clamp ammeter – multifunctional measuring device

No measurement reading visible - and the work comes to a standstill.

Anyone working on wiring in poor lighting conditions knows the problem: The display shows almost nothing, the value disappears again moments later, and you have to work your way through troubleshooting with unreliable tools. The Digital Clamp Ammeter with a large LCD, integrated flashlight, and Data Hold function puts an end to this - the current measurement reading remains frozen until you have written it down, while the automatic shutoff ensures that the battery does not run down unnecessarily.

Advantages

• No measurement reading is lost: The Data Hold function freezes the current displayed value - no more hurriedly looking over or returning to the same measuring point twice.
• No extra light needed: The integrated flashlight illuminates the work area directly - work in dark distribution boxes or flush-mounted installations without additional lighting.
• No more wondering whether the device is still running: The automatic shutoff protects the battery - pick up the measuring device for the next job and it will still have power.

Specifications

• AC current: 0.01 A - 600 A (Manual), 0.3 A - 600 A (Auto)
• DC voltage: 0.1 V - 600 V (Manual), 0.8 V - 600 V (Auto)
• AC voltage: 0.01 V - 600 V (Manual), 0.8 V - 600 V (Auto)
• Resistance: 0.1 Ω - 60 MΩ
• Capacitance: 0.001 nF - 60 mF
• Temperature: -50 °C to 1000 °C
• Frequency: 50 Hz-60 Hz (current) / 40 Hz-2 kHz (voltage)
• Jaw opening: 25 mm
• Power supply: 2 × AAA batteries (not included)
• Measurement functions: AC/DC voltage, AC current, resistance, frequency, NCV, continuity test, voltage test, diode test
• Display: Large LCD
• Package contents: 1 × Digital Clamp Ammeter Set

How to use

1. Insert: Insert two AAA batteries and switch on the device.
2. Measure: Place the clamp around the conductor to be tested, select the measuring range, and read the value on the LCD - activate Data Hold if needed to freeze the value.
3. Secure: Switch off the device after use or wait for the automatic shutoff; use the flashlight for additional illumination in dark environments.

Pro tip: For hard-to-reach wires, use the NCV function (non-contact voltage detection) first to identify live conductors - only then attach the clamp. This saves time and significantly improves workplace safety.