5-piece HSS Carbide Drill Bit Set for Metal & Wood

The drill bit spins out - and the hole is still in the wrong place.

Anyone who regularly drills into metal or wood knows the problem: The drill bit slips when positioning it, the hole shifts, and the material tears. This 5-piece HSS carbide drill bit set tackles exactly that issue - the reinforced cutting geometry grips immediately without slipping and leaves clean holes with no rework. Whether steel sheet, hardwood, plastic sheet, or fiberglass composite: The drill bits retain their sharpness even when used on hard materials and during continuous operation.

Advantages

• No more slipping when positioning: The anti-slip design grips immediately upon first contact - the drill bit remains exactly at the marked spot, regardless of how smooth or hard the surface is.
• No more reworking of drilled holes: The sharp cutting edges cleanly separate the material without tearing - the holes are clean right away, while sandpaper and files stay in the drawer.
• No more premature dulling: The carbide-reinforced HSS alloy withstands high frictional heat - you do not have to check after every third hole whether the drill bit is still cutting.

Specifications

• Material: HSS carbide
• Quantity: 5 drill bits in different sizes
• Suitable materials: Metal, wood, plastic, ceramic, fiberglass
• Design: Anti-slip shank

How to use

1. Choose the size: Select the appropriate drill bit from the 5-piece set and secure it in the drill chuck - make sure the shank is firmly seated.
2. Position: Place the drill bit tip directly on the marked spot - the anti-slip design holds the position without the need for a center punch upon first contact.
3. Drill: Apply even pressure and work at a medium speed - the carbide dissipates heat, helping protect both the drill bit and the material.

Pro tip: When drilling metal, apply one or two drops of cutting oil to the drilling spot - this significantly extends the service life of the carbide drill bits and prevents discoloration of the workpiece.