Double Water Tap Stainless Steel with 2 Outlets

Change the hose while the garden waits – and both tasks remain half done.

You stand at the faucet, the garden hose is connected, but the car urgently needs water – so you have to stop everything, switch connections, and start over. With the stainless steel double faucet, you can connect two hoses simultaneously and operate each outlet separately via independent levers. Watering the garden and washing the car run in parallel without you having to move once. The result: all outdoor tasks done in half the time, without interruption.

Benefits

• No more annoying switching: Because both outlets are active simultaneously, the constant stopping, unscrewing, and switching between two tasks is completely eliminated.
• No lost time running back and forth: Since each outlet can be controlled individually via its own lever, you manage both water circuits from the same spot – no extra trips needed.
• No worries about leaking connections: Thanks to the sealed valve insert and tightly screwed threads, you don’t need to regularly check connection points for leaks – water pressure remains stable and constant.

Specifications

• Material: Stainless steel 304, levers made of zinc alloy
• Dimensions: 15 x 10 cm
• Input thread: 1/2" BSP external thread
• Output thread: 3/4" BSP internal thread with 16 mm quick coupling
• Maximum pressure: 10 bar
• Temperature range: -20 to 80 °C
• Flow rate: Up to 30 l/min per outlet
• Scope of delivery: 1x stainless steel double faucet, 1x PTFE sealing tape, 2x rubber gaskets

Usage

1. Connect: Screw the faucet with the 1/2" external thread onto your existing outdoor faucet – use the included PTFE sealing tape for a tight connection.
2. Insert hoses: Insert one hose each into the two 3/4" outlets with 16 mm quick coupling – both lock securely.
3. Control: Open and close each outlet individually using its respective lever – both water circuits operate independently.

Pro tip: Wrap the PTFE sealing tape at least three times clockwise around the input thread before installation – this ensures a permanently tight connection, even under high water pressure.