VeloCraft wood grinding disc for angle grinder

Grinding discs clog after twenty minutes – and the project is still waiting for its first cut.

Anyone who wants to shape wood with flap discs or sandpaper knows the result: the disc clogs, the material heats up, and after a short time you keep spinning without anything happening. The VeloCraft wood shaping disc turns a standard 125 mm angle grinder into a cutting tool that cleanly removes hardwood, pine, and bark – without clogging, without heat buildup. The perforated carbon steel teeth bite into the wood, the open channels immediately eject chips, and the curved disc shape glides through curves and contours as if there were no resistance.

Advantages

• No more repurchasing worn grinding discs: Those who previously had to buy new flap discs every few projects can now work through bowls, chair spindles, and tree root projects with this carbon steel disc – one tool replaces an entire drawer full of sandpaper.
• No stopping to clear the disc: The hollow teeth immediately throw wood chips and sawdust backward, so you don’t have to stop the machine every two minutes to clean the disc – the project progresses until it’s finished.
• No shaking at the handle from catching on knots or grain: The curved disc shape prevents the grinder from being jerked out of your hand when passing over knots – you maintain control without needing to correct or catch the machine.

Specifications

• Material: Forged carbon steel with metal tooth tips
• Outer diameter: 125 mm (4.9 inches)
• Mounting diameter (bore): 22 mm (7/8 inch)
• Profile: Curved / dome-shaped surface for contour work
• Weight: 54 g (1.9 oz)
• Compatible with: DeWalt, Makita, Milwaukee, Ryobi, Bosch, Metabo, Black+Decker, and any 125 mm angle grinder with 22 mm mount
• Available sizes: 92 mm and 125 mm outer diameter

Usage

1. Mount: Slide the disc onto the 22 mm spindle of the angle grinder and tighten the nut by hand – the 125 mm disc fits any standard 5-inch grinder.
2. Start: Turn on the grinder and let it reach full speed before the disc touches the wood; then guide the curved surface at a shallow angle to the grain – the teeth do the work.
3. Shape: Roll the disc through curves, edges, and hollows; chips fall off immediately, the cut stays sharp, and the shape forms in minutes instead of hours.

Pro tip: For green or resin-rich wood, reduce the pressure and brush the tooth surface with a wire brush after each session – this keeps cutting performance consistently high over many projects.