Stainless steel dual water tap with 2 outlets

Changing hoses while the garden waits - and both tasks remain only half finished.

You are standing at the water tap with the garden hose connected, but the car urgently needs water - so you have to stop everything, switch connections, and start over. With the stainless steel double water tap, you can connect two hoses simultaneously and operate each outlet separately using independent levers. Watering the garden and washing the car happen in parallel, without you having to move even once. The result: all outdoor tasks completed in half the time, without interruption.

Benefits

• No more annoying reconnections: Since both outlets are active at the same time, there is no need to keep interrupting, unscrewing, and reconnecting between two tasks.
• No wasted time walking back and forth: Since each outlet can be adjusted individually using its own lever, you can control both water circuits from the same location - without any extra trips.
• No worries about leaking connections: Thanks to the sealed valve insert and tightly screwed threads, you do not need to regularly check the connection points for leaks - the water pressure remains stable and constant.

Specifications

• Material: 304 stainless steel, zinc alloy levers
• Dimensions: 15 x 10 cm
• Inlet thread: 1/2" BSP male thread
• Outlet threads: 3/4" BSP female threads with 16-mm quick couplings
• Maximum pressure: 10 bar
• Temperature range: -20 to 80 °C
• Flow rate: Up to 30 l/min per outlet
• Package contents: 1x stainless steel double fitting, 1x PTFE sealing tape, 2x rubber seals

Use

1. Connect: Screw the tap with the 1/2" male thread onto your existing outdoor water tap - use the included PTFE sealing tape to ensure a watertight connection.
2. Insert the hoses: Insert one hose into each of the two 3/4" outlets with 16-mm quick couplings - both lock securely into place.
3. Adjust: Open and close each outlet individually using the corresponding lever - both water circuits operate independently of each other.

Pro tip: Before installation, wrap the PTFE sealing tape clockwise around the inlet thread at least three times - this keeps the connection permanently watertight, even under high water pressure.