AquaGuard Pro sealing spray for surfaces

The roof is dripping, the ceiling is turning brown – and the plumber is only coming next week.

A slow drip at the pipe connection or a damp spot on the basement wall quickly turns into an expensive damage. AquaGuard Pro combines resin and polyurethane into a flexible plastic layer that chemically bonds with the substrate – on concrete, PVC, metal, wood, brick, and painted masonry. Within 24 hours, the area is completely waterproof without needing a craftsman to come by.

Benefits

• No further water damage: The brown ceiling stain stops growing because the sealant penetrates directly into the crack and won’t flake off during the next frost or rain shower.
• No more scheduling tradespeople: Apply, let dry, done – three steps without tools, primer, or compressor, so your evening stays free.
• No more doubts whether the seal holds in winter: The cured layer expands and contracts with the substrate at temperatures from -20 °C to +80 °C (-4 °F to +176 °F), instead of cracking at the edges like rubber spray.

Specifications

• Contents: 100 ml / 3.53 fl oz
• Package includes: Can + 9.8 cm application brush
• Drying time: 2–4 hours touch dry, 24 hours fully cured
• Temperature resistance: -20 °C to +80 °C (-4 °F to +176 °F)
• Surfaces: Metal, wood, concrete, PVC, brick, painted masonry
• Formula: Resin + polyurethane + hardener

Application

1. Prepare: Clean the leak area and dry as much as possible – dust and moisture prevent adhesion.
2. Apply: Shake the can vigorously for 30 seconds, spray evenly onto the crack, and work in with the included brush for wider joints.
3. Let cure: Leave the area untouched for 24 hours – then it is fully waterproof and durable.

Pro tip: For active drips, first wipe the area as dry as possible with a cloth, then spray immediately and use the brush to press the material deep into the gap – this significantly speeds up the initial seal.