Digital clamp ammeter – multifunction measuring device

No measurement value readable – and the work comes to a halt.

Anyone working on cables under poor lighting conditions knows the problem: The display barely shows anything, the value disappears the next moment, and you have to fumble through troubleshooting with unreliable tools. The digital clamp ammeter with a large LCD display, integrated flashlight, and data-hold function puts an end to this – the current measurement value stays frozen until you have noted it, and the automatic shut-off ensures the battery doesn’t drain unnecessarily.

Advantages

• No measurement value is lost: The data-hold function freezes the current display value – you no longer have to watch frantically or check the same measurement point twice.
• No extra light needed anymore: The integrated flashlight directly illuminates the work area – you can work in dark distribution boxes or flush-mounted installations without additional lighting.
• No more wondering if the device is still on: The automatic shut-off function protects the battery – you pick up the meter for the next use and it still has power.

Specifications

• Alternating current: 0.01 A – 600 A (Manual), 0.3 A – 600 A (Auto)
• Direct voltage: 0.1 V – 600 V (Manual), 0.8 V – 600 V (Auto)
• Alternating voltage: 0.01 V – 600 V (Manual), 0.8 V – 600 V (Auto)
• Resistance: 0.1 Ω – 60 MΩ
• Capacitance: 0.001 nF – 60 mF
• Temperature: -50 °C to 1000 °C
• Frequency: 50 Hz–60 Hz (current) / 40 Hz–2 kHz (voltage)
• Clamp opening: 25 mm
• Power supply: 2 × AAA batteries (not included)
• Measurement functions: AC/DC voltage, alternating current, resistance, frequency, NCV, continuity test, voltage test, diode test
• Display: Large LCD
• Scope of delivery: 1 × digital clamp ammeter set

Application

1. Insert: Insert two AAA batteries and turn on the device.
2. Measure: Place the clamp opening around the conductor to be tested, select the measurement range, and read the value on the LCD – activate data-hold if needed to freeze the value.
3. Secure: After use, turn off the device or wait for automatic shut-off; use the flashlight for additional lighting in dark environments.

Pro tip: For hard-to-reach cables, first use the NCV function (non-contact voltage detection) to identify live conductors – only then apply the clamp. This saves time and significantly increases work safety.