Stainless steel double faucet with 2 outlets

Changing hoses while the garden waits - and both tasks remain half-finished.

You're standing at the faucet with the garden hose connected, but the car urgently needs water - so you have to stop everything, switch hoses, and start over. With the stainless steel dual tap, you can connect two hoses at once and control each outlet separately using independent levers. Watering the garden and washing the car can happen simultaneously, without you having to move once. The result: all your outdoor chores done in half the time, without interruption.

Benefits

• No more annoying hose swapping: Because both outlets are active at the same time, there's no need to keep stopping, unscrewing, and switching hoses between two tasks.
• No more wasted time walking back and forth: Since each outlet can be adjusted individually with its own lever, you can control both water circuits from the same spot - without extra trips.
• No need to worry about leaking connections: Thanks to the sealed valve insert and tightly screwed threads, you won't need to check connection points for leaks regularly - water pressure stays stable and consistent.

Specifications

• Material: 304 stainless steel, zinc alloy levers
• Dimensions: 15 x 10 cm
• Inlet thread: 1/2" BSP male thread
• Outlet thread: 3/4" BSP female thread with 16 mm quick connector
• Maximum pressure: 10 bar
• Temperature range: -20 to 80 °C
• Flow rate: Up to 30 l/min per outlet
• Package contents: 1x stainless steel dual tap, 1x PTFE thread seal tape, 2x rubber washers

Use

1. Connect: Screw the tap with its 1/2" male thread onto your existing outdoor faucet - use the included PTFE thread seal tape for a watertight connection.
2. Insert the hoses: Insert one hose into each of the two 3/4" outlets with 16 mm quick connectors - both lock securely into place.
3. Adjust: Open and close each outlet individually using its lever - both water circuits operate independently.

Pro tip: Before installation, wrap the PTFE thread seal tape clockwise around the inlet thread at least three times - this ensures a lasting watertight connection, even at high water pressure.