OvaEclat 2.5L pressure foam cannon

The car is only half foamed - and the tank is empty.

Anyone who cleans their vehicle with cheap spray bottles knows the problem: The foam is not enough for a complete round, your arm gets tired from constant pumping, and the thin film of liquid barely adheres to the bodywork. The OvaEclat pressure foam cannon solves all three problems at once - with a 2.5-liter tank, a manual pressure-pumping system, and a 60° wide-angle spray nozzle, it applies dense, adhesive foam over the entire vehicle in a single pass.

Benefits

• No more interruptions: The transparent 2.5-liter tank holds enough solution for the entire vehicle - you can see the fill level at a glance and no longer have to interrupt the washing process to mix more.
• No more muscle soreness: The trigger lock slider keeps the spray mechanism open, allowing you to cover large areas, windows, and wheel wells without pressing constantly - your hand stays relaxed.
• No hesitation under high pressure: The integrated safety valve automatically releases excess pressure before it becomes dangerous - you can pump without ever worrying about tanks bursting.

Specifications

• Tank capacity: 2.5 liters (PP/PE, transparent)
• Spray angle: 60° wide-angle sector nozzle
• Nozzle set: 3 interchangeable nozzle types
• Refill connection: Side water inlet with integrated measuring cup (5–15 ml)
• Safety valve: Explosion-protected overpressure valve
• Trigger: Lock slider for hands-free continuous spraying
• Dimensions (empty): 33 × 12.5 cm
• Weight (empty): approx. 400 g

Instructions

1. Fill: Add soap through the side inlet using the integrated measuring cup, then fill with water - the pump attachment does not need to be removed.
2. Pump: Press the pump down firmly several times until you can feel internal pressure building - then press the trigger to spray dense foam onto the surface.
3. Lock & spray: Slide in the trigger lock for continuous spraying without holding - foam all body panels, windows, and rims evenly, let the foam work, and then rinse.

Pro tip: Add the soap first and then the water - this mixes the solution as you fill it and prevents excessive foam from forming in the tank before pumping.